cancel
Showing results for 
Search instead for 
Did you mean: 

How to MGCP Gateways in CISCODEV Configuration

Highlighted
10 Guide

How to MGCP Gateways in CISCODEV Configuration

Hi All,

 

When try to add MGCP gateways in CISCODEV Configuration for a new prognosis on boarding client the MGCP gateways doesn't listed  in the configuration page. We try to add gateway as shown below. Except MGCP gateways all other gateways working fine.

++++++++++++++++++++++++++++++++++++++++++++++++++++++

ADD DEVICE(bhg-drdsf-vg01.bhg.local, ip=10.116.13.2, type=router)
ADD DEVICE(bhg-v005-vg01.bhg.local, ip=10.105.12.2, type=router)

ADD DEVICE(BHGDALLVGW01, ip=10.50.8.241, type=sipgateway)
ADD DEVICE(BHGDALLVGW02, ip=10.50.8.242, type=sipgateway)

ADD DEVICE(BHG-Springfield-VGW1, ip=10.116.1.2, type=h323gateway)

ADD DEVICE(BHG-Memphis-Midtown-VGW1, ip=10.108.1.2, type=h323gateway)

 

gateways.PNG

++++++++++++++++++++++++++++++++++++++++++++++++++++++

 

Can anyone please explain with detials procedure how to add MGCP gateways in prognosis.

 

 

Thanks,

Venkatesh

4 REPLIES 4
Highlighted
Staff

Re: How to MGCP Gateways in CISCODEV Configuration

Hi Venkatesh,

Can you check if you see any MGCP gateways under the CUCM menu -> Gateways?

 

2018-06-11_16-03-14.png

10 Guide

Re: How to MGCP Gateways in CISCODEV Configuration

Hello Alex,

 

Thanks for your response.

Yes, we are able to see MGCP gateways under the  the CUCM menu -> Gateways. Below is the screen shot for reference.

 

MGCP Gateway.PNG

 

 

Kindly let me know with detial steps how to configure this gateways in the PSTN gateway configuration to show this gateways as MGCP gateways.

 

 

 

 

Thanks,

Venkatesh

Tags (1)
Highlighted
Staff

Re: How to MGCP Gateways in CISCODEV Configuration

Hi Venkatesh,

Your Prognosis should show MGCP gateways under CUCM menu -> Gateways. So your Prognosis is working as designed.

 

The PSTN Gateway section used for standalone gateways (not under CUCM control) and SIP gateways. It is explained at online help Home > Prognosis for Unified Communications > Network Devices > Introduction

Cisco® PSTN (standalone) Gateways
That is, those Gateways that are not used in conjunction with Cisco Unified Communications Manager or where Gateways are added as SIP trunks

 

In the future releases we will show SIP gateways under the CUCM menu -> Gateways as well. 

 

I hope this clarifies.

Regards,

Alex

Highlighted
10 Guide

Re: How to MGCP Gateways in CISCODEV Configuration

Hi Alex,

Hope your doing.

Here the MGCP Gateways are showing down status(red color). We have verified in CUCM the gateways are showing up and registred to call manager as configured.

could you help us how can we bring this gateways to bring up status in prognosis(to make green color).

 

Thanks,

Venkatesh

Webinar: The Journey to Microsoft Teams - Readiness Phase (part 2)

Having looked at the planning phase in session one of this series, we will turn our focus to the readiness phase. The all important technical capabilities assessment, ensuring the network, endpoints and users are adequately prepared for the move.

Hear first hand from IR's Global Head of Information Systems and Technology, Jason Schwendinger, on how he has been tackling these issues.

Join webinar