Cisco Phone unregistered report

Highlighted
05 Base Camper

Cisco Phone unregistered report

Does Prognosis or pathinsight provide unregistered phone details with casuse of the phone resetting for specific duration?

Example: If the phones have been unregistered and reregistered due to network timeout error or call manager issue wnated to generate a report how many phones went down during the time with the reason.

5 REPLIES 5
Highlighted

Re: Cisco Phone unregistered report

Hello Prabhu, 

 

Prognosis does not have this specific information out of the box.

 

The CallManagerAppliancePhone (CMAPHONE) record contains the following fields: 

  • LastRegisteredTime
  • LastUnregisteredTime
  • LastStateChangeTime
  • LastStateChangeReason

A custom display can be created using a Where Clause with any of the above fields to create a custom report. 

This detail can be found in our Prognosis Online Help link: Creating a Display 

If you would like the display created for you, the Account Manager can connect you with Professional Services group.

 

Thanks, 
Dale  

Highlighted
05 Base Camper

Re: Cisco Phone unregistered report

Hi Dale,

Thank you for your quick and prompt response. Is the CallManagerAppliancePhone record is the different appliance other than the call manager?

Yes we wanted to setup such report and will discuss with our Account manager if it is not existing with our prognosis setup.

Highlighted

Re: Cisco Phone unregistered report

Hello Prabhu, 

 

The CallManagerAppliancePhone is the CUCM phone record. 

 

I will contact your Account Manager and request he reaches out to you in regards to the requested report. 

Thanks,
Dale 

Highlighted
10 Guide

Re: Cisco Phone unregistered report

Hi Prabhu/Dale,

 

Did you guys complete to set up the record for getting the phone unregistered count report?

If yes,  can you please share the record with us. 

 

 

Thanks,

Venkatesh

Re: Cisco Phone unregistered report

Hello Venkatesh,

 

One record you can use is the CallManagerAppliancePhone (CMAPHONE) record in a display to buid a report on unregistered phones.  There is a field in the record called IsRegistered (ISREG).  You can use a where clause of ISREG = 0.  the 0 meaning a phone is not registered. 

 

isreg.PNG

 

Once you get that display set up, you can use that as a report.  Hope this helps.

 

Thanks

 

Scot

 

Webinar: Keep the modern workforce connected

Unified Communications has always been an important part of companies' digital transformation efforts due to its ability to enable rich virtual collaboration and communication. But with COVID-19, we've reached a break-through point.

Join Bill Haskins, Sr. Analyst & Partner, Unified Communications at Wainhouse Research, and John Ruthven, CEO at IR discuss UC challenges companies are experiencing due to the COVOID-19 crisis.

Join webinar