cancel
Showing results for 
Search instead for 
Did you mean: 

Support required : getting multiple login from Prognosis on PBXs

Highlighted
05 Base Camper

Support required : getting multiple login from Prognosis on PBXs

I am using Prognosis 11.4, Facing an issue where we can see muliple login's from Prognosis to my Voice switches.

 

Tags (1)
3 REPLIES 3

Re: Support required : getting multiple login from Prognosis on PBXs

Hello Hitesh,

 

If the multiple logins issue is for Avaya Communication Manager (ACM):

  1. Prognosis is designed to use 3 logins per ACM.
    Multiple logins to the ACM is recommended because of the  of data gathered by Prognosis.
    • The number of logins can be adjusted by changing the following setting in the irAVAYA_PBX.ini file:
      From:
      [SAT]
      Connections=3
      To:
      [SAT]
      Connections=2
      Or:
      [SAT]
      Connections=1
      Finally: save the irAVAYA_PBX.ini file and restart the AVAYA_PBX collector (use Task Manager to end the irAVAYA_PBX.exe process, or stop and start the Prognosis service).amount
  2. If the ACM shows more Prognosis connections than set in the irAVAYA_PBX.ini file, the logins might be "hung" due to a known ACM bug. Use the following to correct:
    a. Access the ACM using a SAT connection via ASA or PuTTY.
    b. Use command 'status login' to see the active logins.
    c. Use command 'reset login x' (x being the session number of the login) to clear all the Prognosis logins.
    d. Prognosis will reconnect the number of times set in the irAVAYA_PBX.ini file, but the "hung" logins will remain clear.

 

Thank you,

Scott Baldwin

 

05 Base Camper

Re: Support required : getting multiple login from Prognosis on PBXs

Thanks Scott,

 please share the steps to  configure the prognosis alert via internal outlook,... Thx

Re: Support required : getting multiple login from Prognosis on PBXs

Hello Hitesh,

 

The request from the last reply needs additional clarification:

  • The first response post provided information about updating the irAVAYA_PBX.ini file, but alert(s) were not mentioned.
  • What alert is being referenced by the most resent post?
  • What is the goal of altering the alert configuration?
  • What is meant by "internal Outlook"?

Thank you,

Scott Baldwin

 

 

 

Webinar: The Journey to Microsoft Teams - Readiness Phase (part 2)

Having looked at the planning phase in session one of this series, we will turn our focus to the readiness phase. The all important technical capabilities assessment, ensuring the network, endpoints and users are adequately prepared for the move.

Hear first hand from IR's Global Head of Information Systems and Technology, Jason Schwendinger, on how he has been tackling these issues.

Join webinar